Bring natural light into any room with these easy-to-install glass roofs. Cantifix glass roof panels can be combined to create a larger roof light – simply decide how big you want the frame to be
The colours shown are a close resemblance of the RAL colour used but due to the interpretation of colours by different computers and printers we are unable to warrant an exact match. To assist with a colour indication we have quoted the paint reference for the closest match and these are available from most DIY outlets. However they are provided for guidance only and should not be relied upon as a perfect match.
Please note, delivery is not included in the price. Delivery starts at £150, and is dependent on delivery location and size and weight of the items.
If you would like to order a product in a non-standard size that cannot be configured here, please email us at info@cantifixdirect.co.uk.
The glass will be fitted onto an upstand.
The width is measured across the slope of the roof. Measure the width of the opening of your upstand, and then add 52mm to this to calculate the frame width.
This is to allow the roof frame to oversail the upstand.
If you wish to have a roof with a width greater than 2000mm, then please consult the ‘Number of Leafs Help’.
The glass will be fitted onto an upstand.
The depth is measured down the slope of the roof. Measure the depth of the opening of your upstand, and then add 52mm to this to calculate the frame depth.
The maximum depth of the roof is 1700mm.
Roof panels can be combined to create a larger rooflight. If the size of the roof you want is 2000mm or under then you only need 1 panel and you should select ‘4 frame sides’.
If you want a larger rooflight than this, you will need to order a combination of 2 and 3 frame sided panels. Please see the diagram for explanation. Each panel must be no wider than 2000mm.
You will need to add these panels on to your order separately.
The outer pane of glass can be sandblasted to prevent it from being “seen through”. This is consistently applied over the whole surface to allow a higher degree of privacy. Sandblasting the glass will slightly reduce the amount of light passing through the door.
Roof panels can be combined to create a larger rooflight. If the size of the roof you want is 2000mm or under then you only need 1 panel and you should select ‘4 frame sides’.
If you want a larger rooflight than this, you will need to order a combination of 2 and 3 frame sided panels. Please see the diagram for explanation. Each panel must be no wider than 2000mm.
You will need to add these panels on to your order separately.
Notes or special instructions
